Binder for Chromite Ore Powder Molding

Binder for Chromite Ore Powder Forming

Product Features:

1. Good applicability: Suitable for cold pressing and forming of various metallurgical powders such as iron ore powder, iron concentrate powder, iron oxide scale, iron scraps, steel slag, particle steel, silicon manganese ore powder, manganese ore powder, silicon carbon powder, nickel ore powder, chromite ore powder, copper ore powder, sinter return ore powder, etc. The prepared cold-pressed pellets are widely used as furnace charge for blast furnaces, direct reduction furnaces, iron-melting furnaces, gas generators, etc.

2. Customized solutions: This binder can be tailored to meet specific customer requirements for exclusive products.

3. Strong bonding force: Contains high-bonding components that quickly form a network structure within the material, providing high bonding strength. The pellets exhibit high cold and hot strength, meeting furnace charge requirements.

4. Excellent performance: Each ton of binder can produce 35-100 tons of pellets, with a forming rate of 98%. Wet pellets remain intact after a 2-meter drop, dried strength can reach over 100 kg, and high-temperature resistance up to 1200°C.

Recommended Usage Method:

Direct addition to dry powder: Evenly mix the binder into the material. The general ratio of material to binder is 100:3. The amount of binder added may vary depending on the particle size and specific surface area of the material. Moisten the material and spray an appropriate amount of water according to the material's humidity. Pay attention to controlling humidity. After thorough mixing, proceed with cold pressing to form pellets.

The above method is for reference only; customers can adjust the addition according to actual needs.